REINFORCEMENT MESH
Manufactured using ribbed bar to BS 6744 to the mesh patterns given in BS4483 and typically used where the concrete cover to the steel is minimal, or where a long life cycle is required.
Panels are produced using mechanical or manual welding methods. Stainless UK has facilities to manufacture panels up to the standard 4m x 2m size. Panels can be made to customer specifications and bent if required.
Stainless steel tying wire in 1.2mm diameter is held in stock. This is required for fixing all stainless steel reinforcement and also for fixing any highways bridge deck using carbon steel
BENEFITS
Excellent corrosion resistance
Non-magnetic properties
High/low temperature resistance
Life-cycle cost benefits
Large mat sizes available
Bent to your requirements
Flush edges or overhangs
Available in standard grades 304 and 316. For other grades see reinforcement bar.
Technical Information Utimate Tensile Stress 550 N/mm² Minimum 0.2% proof stress [effective yield] 550 N/mm² Standard mesh size To suit your requirements APPLICATIONS
Roads
Bridges
Aquaducts
Viaducts
Marine / Coastal
Tunnels
BS4483 Ref Main Wires Cross Wires Mass per m² Pitch [mm] Dia [mm] CSA [mm²] Pitch [mm] Dia [mm] CSA [mm²] A393 200 10 393 200 10 393 6.16 A252 200 8 252 200 8 252 3.95 A193 200 7 193 200 7 193 3.02 A142 200 6 142 200 6 142 2.22 A98 200 5 98 200 5 98 1.54 B1131 100 12 1131 200 8 252 10.90 B785 100 10 785 200 8 252 8.14 B503 100 8 503 200 8 252 5.93 B385 100 7 385 200 7 193 4.53 B283 100 6 283 200 7 193 3.73 B196 100 5 196 200 7 193 3.05
STANDARD WELDED MESH
Can be supplied for a cost effective solution for innumerable applications throughout all types of industry.
Welded Mesh is manufactured by laying crosswires at 90° to the longitudinal wires and resistance welding at every intersection.
Available in sheets or rolls in stainless steel grades 304 and 316
Cut to sizes panels available to order
WRAPPING MESH
Pitch mm Wire Dia Available Grades Available Grades D49 100 2.5mm 304 316 D98 200 3.0mm 304 316 MESH ON A ROLL
Pitches Wire Dia Available Grades Sheet Size 30m x 1.22m Rolls 1/4" x 1/4" 0.8mm 304 1/2" x 1/2" 1mm 304 1/2" x 1/2" 1.6mm 304 316 1" x 1" 1.6mm 304 316 Cut to Size Available MESH SHEETS
Pitches Wire Diameter Available Grades Sheet Size 6ft x 3ft 1" x 1" 2.5mm 3.0mm 304 2" x 2" 2.5mm 3.0mm 304 3" x 1/2" 2.5mm 304 Sheet Size 8ft x 4ft 1/2" x 1/2" 2.5mm 3.0mm 304 1" x 1" 2.5mm 3.0mm 304 316 1 1/2" x 1 1/2" 3.0mm 304 316 2" x 2" 2.5mm 3.0mm 304 316 3" x 1/2" 2.5mm 3.0mm 304 3" x 1" 3.0mm 304 3" x 3" 3.0mm 304 Sheet Size 10ft x 5ft 1" x 1" 3.0mm 304 2" x 2" 3.0mm 304 Sheet Size 2m x 1m 33 x 33mm 3.0mm 304 43 x 43mm 3.0mm 304 53 x 53mm 3.0mm 304 44 x 44mm 3.0mm 304
TYING WIRE
Stainless steel tying wire. 1.2mm diameter in a range of coil sizes.
DOUBLE LOOP TIES
Stainless steel double loop ties and wire binder tool.
SAFETY END CAPS
Plastic protection caps for exposed bar ends.