Fits standard drilling machines
Self cleaning thread
High strength thread rolled
Superior corrosion resistance
Restricted access applications
Fast single operation installation
Long life structures
Coastal defence walls, slopes and slabs
Marine and aggressive environments
Mining and tunnelling
Structures in seismic areas
TECHNICAL INFORMATION Grades Available 304 or 316 stainless Ultimate Tensile Stress 650 N/mm² Minimum elogation 20% Typical lengths 3m-3.2m (6m-6.5m to order) Straightness 2 in 1000 Standard bundle weight 1 tonne max Thread (left hand) ISO 10208 BAR SIZE R25 R32 R38 Nominal Dia over threads (mm) 24.71 31.34 37.99 Nominal internal dia (mm) 13 18 24 Effective CSA (mm²) 307 472 586 Ultimate strength min (kN) 200 320 400 Nominal weight (kg/m) 2.45 3.80 4.75 Coupler dia x length (mm) 36 x 140 44 x 150 51 x 160 Load Nut a/f x length (mm) 40 x 60 50 x 70 60 x 80 Cross sectional area (mm²) 307 472 586
Injection anchors are produced using a cold rolled thread which not only enhances the strength of the bar, but also provides a self cleaning, robust thread which is easy to use on construction sites. The ISO standard rope thread, which is continuous along the length of the bar, permits site cutting of the bar without the need for special tools or dressing procedures, whilst also fitting the majority of rock drilling machines.
The bond of the injection anchor is in accordance with BS 8110 and BS 6744, the continuous thread provides a key for the grout.
Stainless steel injection anchors can be supplied with a range of accessories, which can be manufactured to meet individual contract requirements.
The selection of any drill bit is based on experience, but a trialanchor must be satisfactorily tested before the project is finally commenced.
SACRIFICIAL DRILL BITS
Drill bits to suit all applications and ground conditions.
Available in ductile iron or fabricated to customers specific requirements. Please see Pattress Plates Data sheet.
Manufactured either flat which can take up to 8 degree misalignments or dished to suit up to 45 degree misalignment. Can be supplied with a hemi nut or washer to suit.
Allows a small diameter bar to be used with a larger pattress or washer plate.
COUPLERS / NUTS
Load nuts and couplers have been designed to provide a strength of anchorage equal to the theoretical minimum required by the threaded bar. Lock nuts are for locking purpose only
To be fitted to the end of the bar for passing rock netting wire through and many other uses.